Service fleets don’t run like delivery fleets. A plumbing, HVAC, electrical, or field service operation might send the same van to three jobs one day and seven the next. Technicians often take vehicles home. Vans carry ladders, tools, and equipment that change how they perform. And when an emergency call comes in at 6 a.m., the vehicle has to be ready.
That’s why contractors and service fleets tend to ask different questions before they add charging. Here’s what we see them weighing, and how to think through each one before you commit to a plan.
Start With Routes and Sites, Not the Vehicle
It’s natural to start with the van. But the more useful starting point is how your work actually moves. A Work Truck article on lessons from service fleets makes this point directly, advising contractors to begin with their site’s electrical situation and real route data rather than vehicle brochures.
For a service fleet, that means looking at:
- How far technicians typically travel in a day, and how much that varies
- Which jobs and service areas are predictable and which aren’t
- Where vehicles park overnight, whether at the shop or at technicians’ homes
- How long vans sit between the end of one day and the start of the next
Predictable work is the easiest place to start. Work Truck notes that recurring, consistent routes make planning far simpler than unpredictable emergency work. Many service companies begin with the vehicles that run the steadiest schedules and expand from there.
Decide Where Vehicles Will Charge
This is often the biggest question for contractors, because take-home vehicles are so common in the trades. Charging at the shop, charging at technicians’ homes, or some mix of both each comes with tradeoffs.
The ACHR News reported that home charging gets complicated when technicians live far from the office or in apartments that can’t support a charger. Contractors also have to decide how they’ll handle the electricity technicians use at home, and Work Truck recommends making any home charging policy clear and public to everyone involved.
Shop charging gives you more control. Vehicles charge on equipment you own, monitor, and maintain, and you aren’t depending on each technician’s home setup. For many service companies, shop charging becomes the backbone of the plan, with other options filling specific gaps.
Related: What to Expect During Your First Conversation With an EV Charging Provider

Don’t Let Charging Eat Into Billable Time
Contractors are paid for time on the job. Anything that pulls technicians away from customers hurts the business, and charging can do that if it’s poorly planned.
The ACHR News described one HVAC contractor’s concern that charging at the shop could create unbillable hours. The fix is designing charging around when vans are naturally parked, such as overnight or during the gap between dispatch and the first call, so technicians plug in and walk away instead of waiting.
That depends on reliable equipment. A charger that’s down overnight means a van that isn’t ready for the morning’s first job. Our hardware is built in Portland, Oregon, and backed by 98% hardware uptime on our chargers, 99.95% server uptime on our software, and 24/7 support and monitoring. For a service business, that reliability is what keeps the schedule intact.
Account for Equipment and Seasons
Service vans aren’t empty. Racks, toolboxes, ladders, and onboard equipment add weight and draw energy. Both sources note that upfits, payload, and running equipment on the job can reduce how far a vehicle goes on a charge. The ACHR News also points out that cold weather can shrink a contractor’s effective service area, which matters most during winter emergency season.
The takeaway isn’t that electric vans won’t work. It’s that planning should use your real loads and real seasons. Track how vehicles perform on actual jobs, then adjust which vehicles take which routes.
Bring Technicians Into the Process
Technicians are the ones who’ll plug in every day, so their buy-in matters. Work Truck recommends piloting with one or two volunteers rather than the whole crew, and keeping the same vehicle assigned to each driver. It also warns that poorly handled transitions have led some shops to lose good technicians. The ACHR News suggests identifying change agents within the team who can share their experience with coworkers.
A small, well-supported start builds confidence faster than a big rollout that catches people off guard.
Related: What Delivery Fleets Think About When Planning Charging

Track Charging Alongside Everything Else
Service companies already run on data: dispatch, job times, routes, and maintenance. Charging should fit into that picture rather than becoming a separate headache. Work Truck recommends tracking charging in the same systems you already use for routes and jobs.
EV charging management software gives you real-time visibility into charger status and usage, role-based access for your team, usage reporting, and an API that helps share charging data with the other tools you use. That makes it easier to see which vans are ready, spot problems early, and plan expansion based on real use.
Expect a Mixed Fleet for a While
Few service companies switch everything at once. Work Truck describes a mixed fleet as the realistic path for many small and mid-sized service fleets over the next several years, with electrification paced to route density and site capacity.
That’s a practical way to approach EV fleet charging for contractors: start where the work is predictable and build from there.
Related: How to Document Your Fleet’s Daily Routine Before Electrifying

Plan Your First Step With Us
We design, install, support, and maintain charging for service fleets and other EV charging for businesses, so you can focus on your customers instead of your chargers. If you’re weighing a commercial EV charging installation at your shop or yard, talk with our team about where to start. You can also explore our fleet charging solutions.
Sources & Further Reading:
- Work Truck — EV Fleet Reality Check: What Operators Wish They Knew Before Electrifying Their Work Vans: https://www.worktruckonline.com/articles/ev-fleet-reality-check-what-operators-wish-they-knew-before-electrifying-their-work-vans
- The ACHR News — The Pros and Cons of Electric Work Vans for HVAC Contractors: https://www.achrnews.com/articles/166069-the-pros-and-cons-of-electric-work-vans-for-hvac-contractors